GTBuy hoodie sizing: measure chest, length and sleeves
Use a hoodie that fits as your reference. The size letter can come later.
An editorial measurement method. The centimetre example is hypothetical. Follow the seller’s own diagram; no garments were measured for this article.
Basis & references ↓A listing photo leaves the fit question open
The current directory includes NOFS Brown Logo Hoodie at $11.13 in the 23 Oct 2026 snapshot. The listing image and amount are supplied; a verified chest, length and sleeve chart is not.
| Record in centimetres | Your reference hoodie | Selected listing option |
|---|---|---|
| Flat chest width | Measure your garment | Ask for the seller’s method |
| Length and starting point | Record both | Confirm the same starting point |
| Sleeve and seam type | Record both | Do not compare unlike methods |
Keep a field unknown until you have the measurement. The displayed letter size or model photograph cannot fill it for you.
Lay a hoodie you like flat on a table, smooth the fabric without stretching it, and record the measurements in centimetres. Use the same method shown in the seller’s chart.
Three measurements to start with
- Chest width: measure straight across the garment from armpit to armpit. Check whether the chart lists flat width or full circumference; those are different numbers.
- Length: measure from the shoulder near the neck to the hem. Some sellers measure from the centre back instead, so read their diagram.
- Sleeve: check where the measurement begins. A dropped shoulder or raglan sleeve changes the starting point.
Compare numbers before labels
For example, if your reference hoodie measures 60 cm across the chest and the listing shows 55 cm, that is 5 cm less flat width. Choosing the same letter size does not remove that difference. This is a measurement example, not a recommended size or a universal allowance.
Ask for the missing measurement
If the chart is missing or unclear, ask the seller or shopping service for the measurement before committing. A ruler in a warehouse photo can help; the picture must show where the measurement starts and ends.
Check the parts a chart misses
Look at the hood, cuff openings, hem and pocket placement. Fit preferences also depend on what you wear underneath. Browse hoodie listings, save a few candidates and compare each with the same reference garment.
A wide chest can still come with short sleeves
In a hypothetical chart, a hoodie has more chest width than your reference garment but less sleeve length. Calling it oversized does not resolve that trade-off. Check whether sleeve length starts at the shoulder seam or the neck, especially for dropped shoulders. Record chest, body length and sleeves together, using the same method for the reference and the listing. If the seller gives a measurement tolerance, record that too; do not invent a universal tolerance for all garments. Ask for clarification when a chart or ruler photo cannot establish the starting and ending points.
Basis & references
An editorial measurement method. The centimetre example is hypothetical. Follow the seller’s own diagram; no garments were measured for this article.
- Sizing guide
Compare a reference garment with the seller’s method.
- Hoodie references
The feed does not supply a verified measurement chart for every listing.
Questions about this topic
Should I choose my usual size?
Compare the selected size chart with an item you already own. Check the units and measuring method. Flat chest width, full circumference and sleeve length measured from different points cannot be compared as the same measurement.
Use the sizing guideAre the product listing images QC photos?
Not necessarily. A listing image illustrates the catalog entry; a warehouse QC photo should identify the actual ordered item and selected option. We do not relabel listing images as warehouse inspections.
Listing photos versus QC photos